MOUNT MAKER / BETA 0.9.2
FPV antenna and GPS mounts that fit your rear standoffs
Put antennas, GPS, and other rear accessories around the standoffs you already have. Create one connected mount or export separate modules for a different arrangement.
Windows x64 · Free demo · STL export in the full version
Zero to three upper antennas
Build a GPS-only accessory or add antenna tubes and SMA fittings. A third antenna has its own dimensions and placement controls.
GPS and lower T-antenna
Size the GPS pocket and retaining features for your device. Add a lower T-antenna holder where the frame has room.
Connected or separate parts
Use compact mode for a connected body, or save individual accessory configurations as separate projects and exports.
BEFORE YOU START
Measure the actual build.
- Rear standoff spacing, diameter, and available sleeve height
- Antenna stems or SMA hardware, plus cable routing space
- The complete GPS device size and clearance from props and frame plates
The preview helps you design the part. Printed fit, retention, and strength still depend on your measurements, material, and printer.
From dimensions to STL
Fit the frame attachment
Measure the rear standoffs and set spacing, bore, and sleeve height.
Arrange the accessories
Choose tubes or fittings, size the GPS pocket, and check routing and hardware access.
Review the complete build
Export each connected part in the full version and check installed clearance, including cables and props.
Questions about antenna & gps mounts
Can I make a GPS mount without antenna tubes?
Yes. Choose No antennas to remove the upper tubes and their main support block. Add the GPS tray or other accessories you need.
Does an SMA fitting include printed threads?
No. The saddle holds a metal SMA pigtail with its own washer and nut. SMA layouts remain a fit-test feature; measure the connector and check installation access.
Can I include an XT power holder?
The rear assembly supports an optional XT30U or XT60 holder. Use the separate XT connector tool for standalone XT30, XT60, or XT90 mounts.
Make your own antenna & gps mounts.
Try the design tools in the free demo. Save your project and export printable STLs with the full version.
Get Mount Maker on itch.io